Airforce/Gunpower Valve assembly NPT Dead End Plugs
Looking to shut the ports where the gauge and fill nipple install on the valve assembly, this is what you will need.
Once you upgrade the airgun with our "Airforce Condor Regulator with Dual Gauge V2" you will need these to shut the ports on the factory valve assembly.
Apply teflon tape onto the threads of this adapter and install them where your existing gauge and fill nipple threads on the factory valve assembly.
Leave the first 2 threads which screw into on the adapter and apply teflon tape, 4 to 5 wraps of tape will suffice.
Make sure you wrap the tape in the opposite direction of the adapter threads would install, else the teflon tape will unwind when you install this adapter.
Contact us if you need any further customization and we shall be happy to get it done for you. Click Here --->> Contact Us