Airforce Texan Regulator with Dual Gauge V1 (First of its Kind for the Airforce and Gunpower Big Bore Airguns)
For all those people out there looking for a big bore regulator for the airforce and gunpower platform, we now have it for you.
Dual Gauge which shows both the regulated pressure and the tank pressure.
Output range of the regulator can be internally adjusted from 100 bar to 200 bar.
Max fill pressure of the regulator is 300 bar. (Make sure of your tank max working pressure and fill no more than the recommended pressure)
We have been working on this for quite some time and have been periodically testing these regulators for utmost performance. We can proudly say that our regulators are now available for sale and will do a great job on the Airforce Texan and the Gunpower Big Bore Airguns.
Dual Gauge design:
No more guessing, what pressure the regulator is set at. Gauge shows you the output (Regulated pressure) as well as the input pressure. (Tank pressure). No more keeping track of shot counts or guessing and working hard to know the cut off pressure of your regulators. Regulator comes factory set at 150 bar. If you would like it to be set to a desired pressure within the range, do write in the comments when you place the order and it will be pre-tuned and shipped.
Foster fill nipple on the regulator for quick fill or tethering your airgun.
This regulator ensures that your tank retains the quick install and disconnect feature. You don't want to be looking for the Spin-Loc Tool when you want to get started or done shooting.
Larger pre chamber on our regulators in which we have combined both power and consistent shot count.
Built like a tank and tested to 300 bar (working pressure) for safety. The burst pressure for these regulators are beyond 620 bar so they are very safe for use.
Sturdy gauges with metallic body for the wilderness with the airforce and gunpower big bore airguns.
With the reg set at 150 bar we shot the lyman 150gr collar button at 940 fps, and they were mighty accurate at long ranges.
The shot count would depend on what buddy bottle you have attached onto the regulator. Larger the buddy bottle higher the regulated shot count.
It wouldn't matter if you are shooting the airgun tethered as you have a continuous supply of air to the regulator and thereby more number of regulated shots.
Each regulator is filled to 300 bar for 24 hours before they ship to ensure they are free of leaks.
The best raw materials have been used to machine this regulator and to ensure we have a light, durable, safe and proven product. They have been chosen, designed with materials and specs to the highest tolerances for the right job.
Safety is the highest priority for any of the products we manufacture.
Write to us if you need any further info on these regulators. Contact Us
If you need the max shot count then the answer to it is our "1 Ltr Luxfer Carbon Composite Cylinders 300BAR (61cu)(1000cc)"
If you have your own tank with M18 x 1.5 threads, then it would be a direct fit as well.
Contact us if you need any further customization and we shall be happy to get it done for you. Click Here --->> Contact Us