1 Ltr Luxfer Carbon Composite Cylinders 300BAR (61cu)(1000cc) (Bare)
These cylinders are very light when compared with Aluminum and weigh one-third to a corresponding steel tanks.
Carbon fiber tanks can be filled to 4500 psi as these are 300 BAR rated tanks.
Do not fill more than the working pressure of your valves. (Check manual for standard fgactory valves working pressure)
If you are purchasing our valves then the working pressure would be mentioned for them. Always double check before filling to the rated pressures of the valves.
This higher pressure capability tank will help you achieve the higher shot count at high power.al long distances.
Imp Note:- Dont forget to shop for these "Airforce Larger Tank Angled Adapter" as they are a must to attach the valves to get started with the tank and buttplate configuration.
Without these, the valves would not clear the frame. If you have your custom extension or angled adapter then only go in for these, else the below product would suit your needs and save you some money as well.
If you don't like the drop and are looking for a straight adapter then you might want to look for the below.
Extension Adapter for Extreme-Flow Valve Ver 2
But do remember you will need either the angled or straight adapter for the larger tank setup to work.
Brand : Luxfer
Cylinder Batch : 2017
Cylinder Design Life: 15 Years
European Certification: EN 12245
Approving Authority: EN 12245,CE/PED Standard
Neck Thread: M18 x 1.5
Diameter: 85mm (3.34 inches)
Length : 295mm (11.61 inches)
Empty Tank Weight: 1.78 lb (without butt plate and valve)
Cylinder Decommission Year: 2032
Decommission date refers to the last date that the cylinder can be filled at a registered fill station. You can safely continue to use the cylinder after this date until the air is depleted, it just cannot be re-filled at a commercial fill station.
These bare tanks weigh just 790 grams which are just 40 grams more than the 500cc bare buddy bottles.
So you get twice the volume of air without much increase in weight of the tank.
5 year cylinder hydrostatic test cycle.
Contact us if you need any further customization and we shall be happy to get it done for you. Click Here --->> Contact Us