Evanix Rainstorm Regulator
A regulator helps you get consistent shots through a range of fill pressure till it drops below the set pressure. Consistent shots would equate to better accuracy as your point of impact stays for the regulated shot range. These regulators are pre set to 100~110 bar for best performance and max no of shots. We shall be happy to set it to your favored pressure setting if you have a specific requirement. No need to drill holes into your tube or make any changes on the airgun. All you have to do is degauss your existing tank, remove the air tube where it screws onto the action and interface the regulator in between. Enjoy and experience a new world of accurate shooting experience with the reg.
Tests before shipping:
Each regulator is filled to 200 bar for a 24 hours pressure test before they ship to ensure they are free of leaks.
The best raw materials have been used to machine these regulator and to ensure we have a light, durable, safe and proven product. They have been chosen, designed with materials and specs to the highest tolerances for the right job.
Safety is the highest priority for any of the products we manufacture.
Write to us if you need any further info on these regulators. Contact Us
Warranty : Replacement warranty up to 12 months if the product fails.
Fits the following models of Evanix Airguns:
Evanix Rainstorm II
Contact us if you need any further customization and we shall be happy to get it done for you. Click Here --->> Contact Us